Initializing cgroup subsys cpuset Initializing cgroup subsys cpu Linux version 2.6.27.5-117.fc10.i686 (mockbuild@x86-7.fedora.phx.redhat.com) (gcc version 4.3.2 20081105 (Red Hat 4.3.2-7) (GCC) ) #1 SMP Tue Nov 18 12:19:59 EST 2008 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f800 (usable) BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000003f6d0000 (usable) BIOS-e820: 000000003f6d0000 - 000000003f6e2000 (ACPI data) BIOS-e820: 000000003f6e2000 - 000000003f6e3000 (ACPI NVS) BIOS-e820: 000000003f6e3000 - 0000000040000000 (reserved) BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved) BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved) BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved) last_pfn = 0x3f6d0 max_arch_pfn = 0x100000 x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 kernel direct mapping tables up to 38000000 @ 7000-c000 Using x86 segment limits to approximate NX protection RAMDISK: 37c28000 - 37fefeac DMI present. ACPI: RSDP 000F71A0, 0024 (r2 PTLTD ) ACPI: XSDT 3F6DB94A, 0084 (r1 SECCSD LH43STAR 6040000 LTP 0) ACPI: FACP 3F6E1BD2, 00F4 (r3 INTEL CALISTGA 6040000 ALAN 1) ACPI: DSDT 3F6DD5F2, 456C (r1 INTEL CALISTGA 6040000 INTL 20050624) ACPI: FACS 3F6E2FC0, 0040 ACPI: APIC 3F6E1CC6, 0068 (r1 INTEL CALISTGA 6040000 LOHR 5A) ACPI: HPET 3F6E1D2E, 0038 (r1 INTEL CALISTGA 6040000 LOHR 5A) ACPI: MCFG 3F6E1D66, 003C (r1 INTEL CALISTGA 6040000 LOHR 5A) ACPI: TCPA 3F6E1DA2, 0032 (r1 PTLTD CALISTGA 6040000 PTL 1) ACPI: TMOR 3F6E1DD4, 0026 (r1 PTLTD 6040000 PTL 3) ACPI: APIC 3F6E1DFA, 0068 (r1 PTLTD APIC 6040000 LTP 0) ACPI: BOOT 3F6E1E62, 0028 (r1 PTLTD $SBFTBL$ 6040000 LTP 1) ACPI: SLIC 3F6E1E8A, 0176 (r1 SECCSD LH43STAR 6040000 LTP 0) ACPI: SSDT 3F6DCFA3, 064F (r1 SataRe SataPri 1000 INTL 20050624) ACPI: SSDT 3F6DC907, 069C (r1 SataRe SataSec 1000 INTL 20050624) ACPI: SSDT 3F6DB9CE, 04F6 (r2 PmRef CpuPm 3000 INTL 20050624) ACPI: BIOS bug: multiple APIC/MADT found, using 0 ACPI: If "acpi_apic_instance=2" works better, notify linux-acpi@vger.kernel.org ACPI: DMI detected: Samsung 118MB HIGHMEM available. 896MB LOWMEM available. mapped low ram: 0 - 38000000 low ram: 00000000 - 38000000 bootmap 00008000 - 0000f000 (9 early reservations) ==> bootmem [0000000000 - 0038000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] #3 [0000400000 - 000097116c] TEXT DATA BSS ==> [0000400000 - 000097116c] #4 [0037c28000 - 0037fefeac] RAMDISK ==> [0037c28000 - 0037fefeac] #5 [0000972000 - 0000976000] INIT_PG_TABLE ==> [0000972000 - 0000976000] #6 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000] #7 [0000007000 - 0000008000] PGTABLE ==> [0000007000 - 0000008000] #8 [0000008000 - 000000f000] BOOTMAP ==> [0000008000 - 000000f000] found SMP MP-table at [c00f71d0] 000f71d0 Zone PFN ranges: DMA 0x00000000 -> 0x00001000 Normal 0x00001000 -> 0x00038000 HighMem 0x00038000 -> 0x0003f6d0 Movable zone start PFN for each node early_node_map[2] active PFN ranges 0: 0x00000000 -> 0x0000009f 0: 0x00000100 -> 0x0003f6d0 On node 0 totalpages: 259695 free_area_init_node: node 0, pgdat c07f2900, node_mem_map c1000000 DMA zone: 3967 pages, LIFO batch:0 Normal zone: 223520 pages, LIFO batch:31 HighMem zone: 30178 pages, LIFO batch:7 Using APIC driver default ACPI: PM-Timer IO Port: 0x1008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Enabling APIC mode: Flat. Using 1 I/O APICs ACPI: HPET id: 0x8086a201 base: 0xfed00000 Using ACPI (MADT) for SMP configuration information SMP: Allowing 2 CPUs, 0 hotplug CPUs mapped APIC to ffffb000 (fee00000) mapped IOAPIC to ffffa000 (fec00000) PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 00000000000dc000 PM: Registered nosave memory: 00000000000dc000 - 0000000000100000 Allocating PCI resources starting at 50000000 (gap: 40000000:a0000000) PERCPU: Allocating 41372 bytes of per cpu data NR_CPUS: 32, nr_cpu_ids: 2, nr_node_ids 1 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 257665 Kernel command line: ro root=UUID=bf2f614c-f6ad-4c45-baa8-aeee0d8eae48 rhgb quiet Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 CPU 0 irqstacks, hard=c089e000 soft=c087e000 PID hash table entries: 4096 (order: 12, 16384 bytes) Extended CMOS year: 2000 TSC: PIT calibration confirmed by PMTIMER. TSC: using PIT calibration value Detected 1595.966 MHz processor. Console: colour VGA+ 80x25 console [tty0] enabled Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 1019952k/1039168k available (2732k kernel code, 18584k reserved, 1420k data, 412k init, 121664k highmem) virtual kernel memory layout: fixmap : 0xffc57000 - 0xfffff000 (3744 kB) pkmap : 0xff400000 - 0xff800000 (4096 kB) vmalloc : 0xf8800000 - 0xff3fe000 ( 107 MB) lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) .init : 0xc0814000 - 0xc087b000 ( 412 kB) .data : 0xc06ab266 - 0xc080e610 (1420 kB) .text : 0xc0400000 - 0xc06ab266 (2732 kB) Checking if this processor honours the WP bit even in supervisor mode...Ok. CPA: page pool initialized 1 of 1 pages preallocated SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 hpet clockevent registered Calibrating delay loop (skipped), value calculated using timer frequency.. 3191.93 BogoMIPS (lpj=1595966) Security Framework initialized SELinux: Initializing. SELinux: Starting in permissive mode Mount-cache hash table entries: 512 Initializing cgroup subsys ns Initializing cgroup subsys cpuacct Initializing cgroup subsys devices CPU: L1 I cache: 32K, L1 D cache: 24K CPU: L2 cache: 512K CPU: Physical Processor ID: 0 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. using mwait in idle threads. Checking 'hlt' instruction... OK. ACPI: Core revision 20080609 ENABLING IO-APIC IRQs ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 CPU0: Intel(R) Atom(TM) CPU N270 @ 1.60GHz stepping 02 CPU 1 irqstacks, hard=c089f000 soft=c087f000 Booting processor 1/1 ip 6000 Initializing CPU#1 Calibrating delay using timer specific routine.. 3191.84 BogoMIPS (lpj=1595920) CPU: L1 I cache: 32K, L1 D cache: 24K CPU: L2 cache: 512K CPU: Physical Processor ID: 0 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#1. x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 CPU1: Intel(R) Atom(TM) CPU N270 @ 1.60GHz stepping 02 checking TSC synchronization [CPU#0 -> CPU#1]: passed. Brought up 2 CPUs Total of 2 processors activated (6383.77 BogoMIPS). sizeof(vma)=84 bytes sizeof(page)=32 bytes sizeof(inode)=340 bytes sizeof(dentry)=132 bytes sizeof(ext3inode)=492 bytes sizeof(buffer_head)=56 bytes sizeof(skbuff)=184 bytes sizeof(task_struct)=3268 bytes CPU0 attaching sched-domain: domain 0: span 0-1 level SIBLING groups: 0 1 domain 1: span 0-1 level CPU groups: 0-1 CPU1 attaching sched-domain: domain 0: span 0-1 level SIBLING groups: 1 0 domain 1: span 0-1 level CPU groups: 0-1 net_namespace: 840 bytes Booting paravirtualized kernel on bare hardware Time: 16:54:01 Date: 12/02/08 NET: Registered protocol family 16 No dock devices found. ACPI: bus type pci registered PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 PCI: MCFG area at e0000000 reserved in E820 PCI: Using MMCONFIG for extended config space PCI: Using configuration type 1 for base access ACPI: EC: Look up EC in DSDT ACPI: BIOS _OSI(Linux) query ignored via DMI ACPI: Interpreter enabled ACPI: (supports S0 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing ACPI: EC: non-query interrupt received, switching to interrupt mode ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62 ACPI: EC: driver started in interrupt mode ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: 0000:00:02.0 reg 10 32bit mmio: [f0000000, f007ffff] PCI: 0000:00:02.0 reg 14 io port: [1800, 1807] PCI: 0000:00:02.0 reg 18 32bit mmio: [d0000000, dfffffff] PCI: 0000:00:02.0 reg 1c 32bit mmio: [f0300000, f033ffff] PCI: 0000:00:02.1 reg 10 32bit mmio: [f0080000, f00fffff] PCI: 0000:00:1b.0 reg 10 64bit mmio: [f0340000, f0343fff] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold pci 0000:00:1b.0: PME# disabled pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold pci 0000:00:1c.0: PME# disabled pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold pci 0000:00:1c.2: PME# disabled PCI: 0000:00:1d.0 reg 20 io port: [1820, 183f] PCI: 0000:00:1d.1 reg 20 io port: [1840, 185f] PCI: 0000:00:1d.2 reg 20 io port: [1860, 187f] PCI: 0000:00:1d.3 reg 20 io port: [1880, 189f] PCI: 0000:00:1d.7 reg 10 32bit mmio: [f0544000, f05443ff] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold pci 0000:00:1d.7: PME# disabled pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH6 GPIO PCI: 0000:00:1f.2 reg 10 io port: [0, 7] PCI: 0000:00:1f.2 reg 14 io port: [0, 3] PCI: 0000:00:1f.2 reg 18 io port: [0, 7] PCI: 0000:00:1f.2 reg 1c io port: [0, 3] PCI: 0000:00:1f.2 reg 20 io port: [1810, 181f] pci 0000:00:1f.2: PME# supported from D3hot pci 0000:00:1f.2: PME# disabled PCI: 0000:00:1f.3 reg 20 io port: [18a0, 18bf] PCI: 0000:02:00.0 reg 10 64bit mmio: [f0100000, f010ffff] pci 0000:02:00.0: PME# supported from D3hot pci 0000:02:00.0: PME# disabled Pre-1.1 PCIe device detected, disable ASPM for 0000:00:1c.0. It can be enabled forcedly with 'pcie_aspm=force' PCI: bridge 0000:00:1c.0 32bit mmio: [f0100000, f01fffff] PCI: 0000:03:00.0 reg 10 64bit mmio: [f0200000, f0203fff] PCI: 0000:03:00.0 reg 18 io port: [2000, 20ff] pci 0000:03:00.0: supports D1 pci 0000:03:00.0: supports D2 pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:03:00.0: PME# disabled PCI: bridge 0000:00:1c.2 io port: [2000, 2fff] PCI: bridge 0000:00:1c.2 32bit mmio: [f0200000, f02fffff] pci 0000:00:1e.0: transparent bridge bus 00 -> node 0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10 ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 *5 6 7 10 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 *5 6 7 11 12 14 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 *5 6 7 10 12 14 15) ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 *5 6 7 11 12 14 15) ACPI: Power Resource [FN00] (off) Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 11 devices ACPI: ACPI bus type pnp unregistered SCSI subsystem initialized libata version 3.00 loaded. usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 hpet0: 3 64-bit timers, 14318180 Hz tracer: 772 pages allocated for 65536 entries of 48 bytes actual entries 65620 ACPI: RTC can wake from S4 system 00:01: iomem range 0xe0000000-0xefffffff could not be reserved system 00:01: iomem range 0xfed14000-0xfed17fff could not be reserved system 00:01: iomem range 0xfed18000-0xfed18fff could not be reserved system 00:01: iomem range 0xfed19000-0xfed19fff could not be reserved system 00:01: iomem range 0xfed1c000-0xfed1ffff could not be reserved system 00:01: iomem range 0xfed20000-0xfed3ffff could not be reserved system 00:01: iomem range 0xfed40000-0xfed44fff could not be reserved system 00:01: iomem range 0xfed45000-0xfed8ffff could not be reserved system 00:04: iomem range 0xfed00000-0xfed003ff could not be reserved system 00:06: ioport range 0x680-0x69f has been reserved system 00:06: ioport range 0x800-0x80f has been reserved system 00:06: ioport range 0x1000-0x107f has been reserved system 00:06: ioport range 0x1180-0x11bf has been reserved system 00:06: ioport range 0x1640-0x164f has been reserved system 00:07: ioport range 0x6a0-0x6af has been reserved system 00:07: ioport range 0x6b0-0x6ff has been reserved pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02 pci 0000:00:1c.0: IO window: disabled pci 0000:00:1c.0: MEM window: 0xf0100000-0xf01fffff pci 0000:00:1c.0: PREFETCH window: disabled pci 0000:00:1c.2: PCI bridge, secondary bus 0000:03 pci 0000:00:1c.2: IO window: 0x2000-0x2fff pci 0000:00:1c.2: MEM window: 0xf0200000-0xf02fffff pci 0000:00:1c.2: PREFETCH window: disabled pci 0000:00:1e.0: PCI bridge, secondary bus 0000:04 pci 0000:00:1e.0: IO window: disabled pci 0000:00:1e.0: MEM window: disabled pci 0000:00:1e.0: PREFETCH window: disabled pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 pci 0000:00:1c.0: setting latency timer to 64 pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 pci 0000:00:1c.2: setting latency timer to 64 pci 0000:00:1e.0: setting latency timer to 64 bus: 00 index 0 io port: [0, ffff] bus: 00 index 1 mmio: [0, ffffffffffffffff] bus: 02 index 0 mmio: [0, 0] bus: 02 index 1 mmio: [f0100000, f01fffff] bus: 02 index 2 mmio: [0, 0] bus: 02 index 3 mmio: [0, 0] bus: 03 index 0 io port: [2000, 2fff] bus: 03 index 1 mmio: [f0200000, f02fffff] bus: 03 index 2 mmio: [0, 0] bus: 03 index 3 mmio: [0, 0] bus: 04 index 0 mmio: [0, 0] bus: 04 index 1 mmio: [0, 0] bus: 04 index 2 mmio: [0, 0] bus: 04 index 3 io port: [0, ffff] bus: 04 index 4 mmio: [0, ffffffffffffffff] NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 8, 1048576 bytes) TCP bind hash table entries: 65536 (order: 7, 524288 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered NET: Registered protocol family 1 checking if image is initramfs... it is Switched to high resolution mode on CPU 1 Switched to high resolution mode on CPU 0 Freeing initrd memory: 3871k freed Simple Boot Flag at 0x36 set to 0x1 apm: BIOS not found. audit: initializing netlink socket (disabled) type=2000 audit(1228236841.672:1): initialized highmem bounce pool size: 64 pages HugeTLB registered 4 MB page size, pre-allocated 0 pages VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) msgmni has been set to 1762 SELinux: Registering netfilter hooks Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) pci 0000:00:02.0: Boot video device pcieport-driver 0000:00:1c.0: setting latency timer to 64 pcieport-driver 0000:00:1c.0: found MSI capability pci_express 0000:00:1c.0:pcie00: allocate port service pci_express 0000:00:1c.0:pcie02: allocate port service pci_express 0000:00:1c.0:pcie03: allocate port service pcieport-driver 0000:00:1c.2: setting latency timer to 64 pcieport-driver 0000:00:1c.2: found MSI capability pci_express 0000:00:1c.2:pcie00: allocate port service pci_express 0000:00:1c.2:pcie02: allocate port service pci_express 0000:00:1c.2:pcie03: allocate port service pci_hotplug: PCI Hot Plug PCI Core version: 0.5 acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 ACPI: AC Adapter [ADP1] (off-line) ACPI: Battery Slot [BAT1] (battery present) input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 ACPI: Power Button (FF) [PWRF] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1 ACPI: Lid Switch [LID0] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2 ACPI: Power Button (CM) [PWRB] input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3 ACPI: Sleep Button (CM) [SLPB] ACPI: Transitioning device [FAN0] to D3 fan PNP0C0B:00: registered as cooling_device0 ACPI: Fan [FAN0] (off) ACPI: SSDT 3F6DC5EE, 0245 (r2 PmRef Cpu0Ist 3000 INTL 20050624) ACPI: SSDT 3F6DBEC4, 06A5 (r2 PmRef Cpu0Cst 3001 INTL 20050624) Monitor-Mwait will be used to enter C-1 state processor ACPI0007:00: registered as cooling_device1 ACPI: Processor [CPU0] (supports 8 throttling states) ACPI: SSDT 3F6DC833, 00D4 (r2 PmRef Cpu1Ist 3000 INTL 20050624) ACPI: SSDT 3F6DC569, 0085 (r2 PmRef Cpu1Cst 3000 INTL 20050624) processor ACPI0007:01: registered as cooling_device2 ACPI: Processor [CPU1] (supports 8 throttling states) thermal LNXTHERM:01: registered as thermal_zone0 ACPI: Thermal Zone [TZ00] (45 C) isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found hpet_resources: 0xfed00000 is busy Non-volatile memory driver v1.2 Linux agpgart interface v0.103 agpgart-intel 0000:00:00.0: Intel 945GME Chipset agpgart-intel 0000:00:00.0: detected 7932K stolen memory agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000 Serial: 8250/16550 driver4 ports, IRQ sharing enabled brd: module loaded loop: module loaded input: Macintosh mouse button emulation as /devices/virtual/input/input4 Driver 'sd' needs updating - please use bus_type methods Driver 'sr' needs updating - please use bus_type methods ata_piix 0000:00:1f.2: version 2.12 ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ] ata_piix 0000:00:1f.2: setting latency timer to 64 scsi0 : ata_piix scsi1 : ata_piix ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x1810 irq 14 ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1818 irq 15 ata1.00: ATA-8: FUJITSU MHZ2160BH G2, 00000009, max UDMA/100 ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32) ata1.00: configured for UDMA/100 ata2: port disabled. ignoring. scsi 0:0:0:0: Direct-Access ATA FUJITSU MHZ2160B 0000 PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sda3 < sda5 sda6 sda7 sda8 sda9 sda10 > sd 0:0:0:0: [sda] Attached SCSI disk sd 0:0:0:0: Attached scsi generic sg0 type 0 ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 ehci_hcd 0000:00:1d.7: setting latency timer to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1d.7: debug port 1 ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf0544000 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 8 ports detected usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: EHCI Host Controller usb usb1: Manufacturer: Linux 2.6.27.5-117.fc10.i686 ehci_hcd usb usb1: SerialNumber: 0000:00:1d.7 ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver USB Universal Host Controller Interface driver v3.0 uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 uhci_hcd 0000:00:1d.0: setting latency timer to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001820 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected usb 1-8: new high speed USB device using ehci_hcd and address 2 usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: UHCI Host Controller usb usb2: Manufacturer: Linux 2.6.27.5-117.fc10.i686 uhci_hcd usb usb2: SerialNumber: 0000:00:1d.0 uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 uhci_hcd 0000:00:1d.1: setting latency timer to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001840 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb3: Product: UHCI Host Controller usb usb3: Manufacturer: Linux 2.6.27.5-117.fc10.i686 uhci_hcd usb usb3: SerialNumber: 0000:00:1d.1 uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 uhci_hcd 0000:00:1d.2: setting latency timer to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001860 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected usb 1-8: configuration #1 chosen from 1 choice usb 1-8: New USB device found, idVendor=0ac8, idProduct=c326 usb 1-8: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 1-8: Product: Namuga 1.3M Webcam usb 1-8: Manufacturer: Vimicro Corp. usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb4: Product: UHCI Host Controller usb usb4: Manufacturer: Linux 2.6.27.5-117.fc10.i686 uhci_hcd usb usb4: SerialNumber: 0000:00:1d.2 uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16 uhci_hcd 0000:00:1d.3: setting latency timer to 64 uhci_hcd 0000:00:1d.3: UHCI Host Controller uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:1d.3: irq 16, io base 0x00001880 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb5: Product: UHCI Host Controller usb usb5: Manufacturer: Linux 2.6.27.5-117.fc10.i686 uhci_hcd usb usb5: SerialNumber: 0000:00:1d.3 PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 i8042.c: Detected active multiplexing controller, rev 1.1. serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX0 port at 0x60,0x64 irq 12 serio: i8042 AUX1 port at 0x60,0x64 irq 12 serio: i8042 AUX2 port at 0x60,0x64 irq 12 serio: i8042 AUX3 port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5 rtc_cmos 00:08: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one month, y3k, hpet irqs device-mapper: uevent: version 1.0.3 device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com cpuidle: using governor ladder cpuidle: using governor menu usbcore: registered new interface driver hiddev usbcore: registered new interface driver usbhid usbhid: v2.6:USB HID core driver nf_conntrack version 0.5.0 (16384 buckets, 65536 max) CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Plase use nf_conntrack.acct=1 kernel paramater, acct=1 nf_conntrack module option or sysctl net.netfilter.nf_conntrack_acct=1 to enable it. ip_tables: (C) 2000-2006 Netfilter Core Team TCP cubic registered Initializing XFRM netlink socket NET: Registered protocol family 17 Using IPI No-Shortcut mode registered taskstats version 1 Magic number: 4:773:943 tty tty0: hash matches tty console: hash matches Freeing unused kernel memory: 412k freed Write protecting the kernel text: 2736k Write protecting the kernel read-only data: 1172k Synaptics Touchpad, model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04731/0xa40000 input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input6 padlock: VIA PadLock not detected. padlock: VIA PadLock Hash Engine not detected. kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. type=1404 audit(1228236866.936:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295 SELinux: 8192 avtab hash slots, 109076 rules. SELinux: 8192 avtab hash slots, 109076 rules. SELinux: 8 users, 11 roles, 2503 types, 119 bools, 1 sens, 1024 cats SELinux: 73 classes, 109076 rules SELinux: Completing initialization. SELinux: Setting up existing superblocks. SELinux: initialized (dev dm-4, type ext3), uses xattr SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts SELinux: initialized (dev devpts, type devpts), uses transition SIDs SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts SELinux: initialized (dev pipefs, type pipefs), uses task SIDs SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts SELinux: initialized (dev sockfs, type sockfs), uses task SIDs SELinux: initialized (dev proc, type proc), uses genfs_contexts SELinux: initialized (dev bdev, type bdev), uses genfs_contexts SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts type=1403 audit(1228236867.467:3): policy loaded auid=4294967295 ses=4294967295 udevd version 127 started sky2 0000:03:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 sky2 0000:03:00.0: setting latency timer to 64 sky2 0000:03:00.0: v1.22 addr 0xf0200000 irq 18 Yukon-2 FE+ rev 0 sky2 eth0: addr 00:13:77:ad:f7:e5 input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/input/input7 ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) ath5k_pci 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 ath5k_pci 0000:02:00.0: setting latency timer to 64 ath5k_pci 0000:02:00.0: registered as 'phy0' ath5k phy0: Support for RF2425 is under development. phy0: Selected rate control algorithm 'pid' intel_rng: FWH not detected ath5k phy0: Atheros AR2425 chip found (MAC: 0xe2, PHY: 0x70) iTCO_vendor_support: vendor-support=0 Linux video capture interface: v2.00 iTCO_wdt: Intel TCO WatchDog Timer Driver v1.03 (30-Apr-2008) iTCO_wdt: Found a ICH7-M TCO device (Version=2, TCOBASE=0x1060) iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) input: PC Speaker as /devices/platform/pcspkr/input/input8 uvcvideo: Found UVC 1.00 device Namuga 1.3M Webcam (0ac8:c326) input: Namuga 1.3M Webcam as /devices/pci0000:00/0000:00:1d.7/usb1/1-8/1-8:1.0/input/input9 i801_smbus 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19 ACPI: I/O resource 0000:00:1f.3 [0x18a0-0x18bf] conflicts with ACPI region SMBI [0x18a0-0x18af] ACPI: Device needs an ACPI driver usbcore: registered new interface driver uvcvideo USB Video Class driver (v0.1.0) HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 HDA Intel 0000:00:1b.0: setting latency timer to 64 device-mapper: multipath: version 1.0.5 loaded EXT3 FS on dm-4, internal journal kjournald starting. Commit interval 5 seconds EXT3 FS on dm-6, internal journal EXT3-fs: mounted filesystem with ordered data mode. SELinux: initialized (dev dm-6, type ext3), uses xattr kjournald starting. Commit interval 5 seconds EXT3 FS on dm-7, internal journal EXT3-fs: mounted filesystem with ordered data mode. SELinux: initialized (dev dm-7, type ext3), uses xattr kjournald starting. Commit interval 5 seconds EXT3 FS on sda6, internal journal EXT3-fs: mounted filesystem with ordered data mode. SELinux: initialized (dev sda6, type ext3), uses xattr SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs Adding 2096628k swap on /dev/mapper/luks-1ee59af1-8a13-46e8-8ea2-afcc1a1f39c4. Priority:-1 extents:1 across:2096628k SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts IA-32 Microcode Update Driver: v1.14a firmware: requesting intel-ucode/06-1c-02 firmware: requesting intel-ucode/06-1c-02 NET: Registered protocol family 10 lo: Disabled Privacy Extensions ip6_tables: (C) 2000-2006 Netfilter Core Team RPC: Registered udp transport module. RPC: Registered tcp transport module. SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts Bluetooth: Core ver 2.13 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized Bluetooth: L2CAP ver 2.11 Bluetooth: L2CAP socket layer initialized Bluetooth: BNEP (Ethernet Emulation) ver 1.3 Bluetooth: BNEP filters: protocol multicast Bridge firewalling registered pan0: Dropping NETIF_F_UFO since no NETIF_F_HW_CSUM feature. Bluetooth: SCO (Voice Link) ver 0.6 Bluetooth: SCO socket layer initialized sky2 eth0: enabling interface ADDRCONF(NETDEV_UP): eth0: link is not ready ADDRCONF(NETDEV_UP): wlan0: link is not ready [drm] Initialized drm 1.1.0 20060810 pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:02.0: setting latency timer to 64 [drm] Initialized i915 1.6.0 20080730 on minor 0 fuse init (API version 7.9) SELinux: initialized (dev fuse, type fuse), uses genfs_contexts